100M Industrial Fiber Converter




---  1-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

---  1-port 155Base-FX SC interface
---  High performance Store and Forward architecture
---  DIN rail and wall mount design
---  Contact Discharge 8KV DC;Air Discharge 15KV DC

---  -40 to 85 degrees C wide operating temperature

---  IP40 industrial metal case protection






Designed for Video Security solution 

  • Highly Convenient and Distance Extendable Industrial Switch

    Benchu Group  IES7211 series is a new Industrial Ethernet Switch that can operate under WIDE-TEMPERATURE environment ranging from -40 up to 85 degrees C and is equipped with fiber  slots which can be extended from 2 kilometers (via multi-mode fiber) up to above 60 kilometers (via single-mode fiber), respectively. In other words, the IES7211 provides more flexibility for Transportation, Manufacturing, Security and Surveillance with distance extension without any limitation and is a suitable model either for long or short distance network deployment.






    12-54V  DC

    Redundant Power Input




    1x  155M SC





    1x  10/100M RJ45





    IP40 Rugged Case




    Flexible and Easy Installation with Limited Space

    This industrial switch is specially designed to be installed in a narrow environment, such as wall enclosure. It can be installed by fixed wall mounting or DIN rail, thereby making its usability more flexibly and easily in any space-limited location.


    DIN-rail  Mounting 




    Hardened Design

    The IES7211 series can operate stably in harsh environment with wide operating temperature support. It also provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets.


    Easy Installation and Wide Range of Power Usages

    The IES7211 is designed with a compact case that allows either DIN rail or panel mounting for the efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 54V DC power supply inputs for high availability applications requiring dual or backup power inputs


    6KV Surge Protection Design
    This Industrial unmanaged Ethenet switch is based on the IEC61643-21:2000 standard, integrated with surge protection for both network signal and power together. It is adapted to the lightning surge protection for surveillance IP camera ,wireless camera's power line, network cable, exempt from the damage caused by reacting overvoltage, operating over-voltage and static electricity discharge etc. Reaching 6KV surge protection, the Ethernet ports owns the capacity to keep the industral Ethernet Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.





    10/100Mbps Industrial  Fiber Converter ,SC, 6KV surge protection

    Ordering  Information

  • Hardware Specifications

    Copper Ports

    1 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-X  Cable

    1 x 155Base-FX SC 
    Multi-mode: 50/125μm / 62.5/125μm fiber
    Single-mode: 9/125μm fiber 

    Optical Interface

    Power Requirements

    12~54V DC, redundant power with reverse polarity protection

    Power Consumption 

    2 watts

    DIN-rail kit and wall-mount ear


    Buffer Memory

    1M bits on-chip buffer memory


    IP40 metal case

    Dimensions (W x D x H)

    30 x 90 x 130 mm (1.18in x 3.54in x 5.12in )

    4K entries

    Address Table



    Contact Discharge 8KV DCAir Discharge 15KV DC

    ESD Protection


    Switch Processing Scheme

    Switch Specifications

    Network Cables

    Cat. 3, 4, 5, 5e UTP cable (max. 100 meters)
    EIA/TIA-568 100-ohm STP (max. 100 meters)

    Back pressure for half duplex;IEEE 802.3x pause frame for full duplex

    Flow Control


    Switch Fabric



    Jumbo Frame


    Operating: 5~90%,

    Storage: 5~90% (non-condensing)



    IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)

    IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)

    IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV

    IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

    IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)

    IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

    IEC 60068-2-32 (free fall)

    IEC 60068-2-27 (shock)

    IEC 60068-2-6 (vibration)

    Stability Testing

    Regulatory Compliance

    FCC Part 15 Class A, CE

    Standards Conformance

    IEEE 802.3 Ethernet, 10Base-T
    IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
    IEEE 802.3x Flow Control

    Standards Compliance

    Operating: -40~85 degrees C
    Storage: -40~85 degrees C



  • PoE




    Designed for Heavy Industries

    The Industrial swtich with IP40-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.


  • Datasheet

Industrial Switch

Verification code