Single-Port Gigabit PoE Injector



---  All-in-one compact size design
---  Fully IEEE802.3af/IEEE802.3at compliant
---  Auto detection and protection of Non standard

      Ethernet terminals
---  10/100/1000 Mbps supported
---  Plug & Play. No configuration required






Designed for Video Security solution 

  • All-in-One and Compact Size Design

    With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, Benchu Group PoE Injector is an all-in-one, single-port PoE+ injector with internal power supply. In the compact size housing and it provides one 100-240V AC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE) on the top side and two RJ45 ports (PoE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and this PoE injector is ready to provide high-speed network communication and ultra power PoE injector functions simultaneously with no need of software configuration.


    Quick and Easy Gigabit  Power PoE Network Deployment

    The PoE Injector is a Single-Port, Ultra Power over Ethernet Injector with a maximum of 30 watts of power output over Ethernet cables. It is designed specifically to meet the demand for growing high power required network equipment such as:

               --- PTZ Speed Dome
               --- AIO (All-in-One) touch PC
               --- IP Securty Camera
               --- Other network devices that need higher power to work normally


    1ch 10/100/1000M PoE Injector.30W    



    1ch 10/100M PoE Injector.30W

    Ordering  Information

    Quick and Easy Cabling Installation for PoE Network Deployment

    Backward compatible with both 802.3af and 802.3at PoE standards, the PoE Injector allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.


    Surge Protection
    PoE Injector is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Injector from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.




  • Hardware Specifications


    “Data” Input Ports: 1 x RJ-45 
    “Data+Power” Output Ports: 1 x RJ-45


    Data Rate



    10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
    100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
    1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)

    Network Cable

    Operating: 5~90%, (non-condensing)

    Storage: 5~90% (non-condensing)


    FCC Class A, CE Class A


    Standards Conformance

    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3ab 1000Base-T Gigabit Ethernet
    IEEE 802.3at Enhancement Power over Ethernet
    IEEE 802.3af Power over Ethernet


    Standards Compliance

    Operating: -20~55 degrees C
    Storage: -40~75 degrees C





    Dimensions (W x D x H)

    62 x 146 x 41 mm  (2.44in x 5.75n x 1.61in)

    Power Requirements 

    90-240VAC ,50-60Hz

    Hardware Specifications

    PoE 52V DC, max. 30 watts

    Power Output

    Power over Ethernet

    Power Pin Assignment

    1/2 (+), 3/6 (-)

    PoE Power Supply Type


  • PoE




    PoE Optimizes the Installation and Power Management of Network Devices 

    This 1 port Power over Ethernet midspan Injector offer an easy,fast and cost effective solution for powering network video products,Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower. 




  • Datasheet

PoE Injector

Verification code

local Lan