Single-Port Gigabit Ultra High power Industrial PoE Injector
IES7210-102GE-60W
---- All-in-one compact size design
--- Fully IEEE802.3af/IEEE802.3at/IEEE802.3bt compliant
--- Auto detection and protection of Non standard Ethernet
terminals
--- 10/100/1000 Mbps supported
--- Plug & Play. No configuration required
--- Higher conversion efficiency(90%). Lower heat radiation
--- DIN rail and wall-mount design
--- Contact Discharge 8KV DC;Air Discharge 15KV DC
--- -40 to 85 degrees C operating temperature
Designed for Video Security solution
Benchu Group Ultra Power over Ethernet Injector provides a maximum of 60-watt power and high-speed Ethernet data connection anywhere in your network infrastructure.it's an excellent choice for power supply and network transmission on PTZ cameras, all-in-one PC, digital display system
This Hardened PoE/PoE+ Industrial PoE Injector are designed to operate at -40 to 85°C in harsh environments where high ESD, shock and vibration ma be present and to provide an economical solution for your industrial Ethernet network.
The Industrial PoE injector can be easily installed on a DIN rail as well as in distribution boxes. The DIN-rail mounting capability, wide operating temperature capability, and the IP40 housing with LED indicators make the plug-and-play switches easy to use and reliable.
IP40 Rugged Case
48-57V DC Power Input
Quick and Easy Gigabit Ultra Power PoE Network Deployment
The Ultra industrial PoE Injector is a Single-Port, Ultra Power over Ethernet Injector with a maximum of 60 watts of power output over Ethernet cables. It is designed specifically to meet the demand for growing higher power required network equipment such as:
--- PTZ Speed Dome
--- AIO (All-in-One) touch PC
--- Remote digital signage display
--- Other network devices that need higher power to work normally
Benchu Group Ultra Power over Ethernet Injector provides a maximum of 60-watt power and high-speed Ethernet data connection anywhere in your network infrastructure.it's an excellent choice for power supply and network transmission on PTZ cameras, all-in-one PC, digital display system
1ch 10/100/1000M Industrial PoE Injector.60W
IES7210-102GE-60W
IES7210-102-60W
1ch 10/100M Industrial PoE Injector.60W
Ordering Information
Quick and Easy Cabling Installation for PoE Network Deployment
Backward compatible with both 802.3af and 802.3at and IEEE802.3bt PoE standards, the Ultra PoE Injector allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. It frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time.
All-in-One and Compact Size Design
With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, Benchu Group PoE Injector is an all-in-one, single-port PoE+ injector with internal power supply. In the compact size housing and it provides one 48-57V DC input socket on its front panel, two LEDs (System POWER and PoE ACTIVE) on the top side and two RJ45 ports (PoE port and LAN port) on the rear panel. Simply plug in the Ethernet cables and power cord, and this PoE injector is ready to provide high-speed network communication and ultra power PoE injector functions simultaneously with no need of software configuration.
60 watts of Power over 4-pair UTP
The Ultra PoE solutions use the same cabling standard such as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.
Surge Protection
This Industrial PoE Injector is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the industrial PoE Injector from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.
Hardware Specifications
Interface
“Data” Input Ports: 1 x RJ-45
“Data+Power” Output Ports: 1 x RJ-45
10/100/1000Mbps
Data Rate
LED
PWR/POE
10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft)
100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft)
1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft)
Network Cable
Operating: 5~90%, (non-condensing)
Storage: 5~90% (non-condensing)
Humidity
FCC Class A, CE Class A
Emissions
Standards Conformance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Enhancement Power over Ethernet
IEEE 802.3bt Ultra Power over Ethernet
Standards Compliance
Operating: -40~85 degrees C
Storage: -40~85 degrees C
Temperature
Environment
Weight
0.35kg
Dimensions (W x D x H)
30 x 70 x 95mm (1.18in x 2.76in x 7.75in )
Power Requirements
48-57V DC
Hardware Specifications
PoE 56V DC, max. 65 watts
Power Output
Power over Ethernet
Power Pin Assignment
12/45(+),36/78(-)
PoE Power Supply Type
Mid-span
Industrial Standard
EMI:
FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS:
IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
Machinery
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)
ESD Protection
6KV ESD
Enclosure
IP40 Metal case
PoE
PoE Optimizes the Installation and Power Management of Network Devices
This one port Power over Ethernet midspan Injector offer an easy,fast and cost effective solution for powering network video products,Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower.
IES7210-102GE-60W
IES7210-102-60W
Datasheet
끸
|
|
|
|
|
|
|
|
|
|
local Lan
+86 755 23246531 sales@benchu-group.net www.benchu-group.net