ꁆ ꁇ

4ch 10/100/1000M PoE Extender

끂 DOWNLOAD

POE-EX04G-30W

---  Plug and Play installation
---  5-port 10/100/1000BASE-T Gigabit RJ45 interface 
---  Support 60W PoE input
---  Supports PoE power up to 30.8 watts for each PoE port
---  Up to 4 IEEE 802.3af / 802.3at devices powered

 


 

 

 

 

Designed for Video Security solution 

  • This gigabit PoE extender offers 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE port which was designed especially for point to multipoint PoE application. The POE-EX04G-30W series can obtain a maximum of 30-watt PoE power from ultra PoE input port and supplies a maximum of 28-watt PoE power budget for 4 PoE output ports, extending both the reach of Gigabit Ethernet Data and IEEE 802.3at / 802.3af Power over Ethernet over the standard 100m (328 ft.) CAT. 5/5e/6 UTP cable to 200m up to 4 powered devices at the same time. The POE-EX04G-30W provides a simple solution for adding PoE ports without running more cabling and achieves more flexible network applications without requiring an external power adapter.

     

    POE-EX04G-30W

    POE-EX04G-30W

    802.3af(15.4W)

    802.3at(30W)

    802.3at(30W)

    802.3af(15.4W)

    802.3af(15.4W)

    802.3af(15.4W)

    POE-EX04G-30W

    4ch 10/100/1000M PoE Extender, No power requried

    Ordering  Information

    Plug and Play Installation

    The POE-EX04G-30W is quite easy to be installed by simple Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The POE-EX04G-30W injects power to the PD without affecting the data transmission performance. The POE-EX04G-30W offers a cost-effective and quick solution to doubling the standard range of PoE from 100 to 200 meters. The POE-EX04G-30W is designed in a compact box containing five RJ45 ports, of which one "PoE IN" port functions as PoE (Data and Power) input and the other four "PoE OUT" ports function as PoE output. The "PoE OUT" port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.

     

    Surge Protection
    This     PoE Extender is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Extender from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.

     

     

     

  • Hardware Specifications

    Interface

    PoE in Port: 1 x 10/100/1000BASE-T Ethernet POE PD In
    PoE out Port: 4x 10/100/1000BASE-T Ethernet POE PSE Out

    Store-and-Forward switch architecture

    Switch Architecture

    MAC Address Table

    4K MAC address table with auto learning function

    UTP cat 5 or abover

    Network Cable

    Operating: 5~90%, (non-condensing)

    Storage: 5~90% (non-condensing)

    Humidity

    Standards Conformance

    IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3ab Gigabit Ethernet
    IEEE 802.3x Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
     

    Standards Compliance

    Operating: -20~55 degrees C
    Storage: -40~75 degrees C

    Temperature

    Environment 

    Flow Control

    IEEE 802.3x pause frame for full duplex

    Back pressure for half duplex

    Packet forwarding rate

    11.46  Mpps @ 64Bytes

    Backplane bandwidth

    16Gbps

    Hardware Specifications

    Power Pin Assignment

    1/2(-), 3/6(+),

    Power over Ethernet

    PoE Power

    PoE in Port：48~56V DC, max.30 watts

    Per PoE out Port：48~56V DC, max. 15.4 watts

    30watts (max.) @ IEEE 802.3at PoE+ Input

    PoE Power Budget

    PoE Standard

    PoE in Port：IEEE 802.3af/at PoE PD
    Per PoE out Port：EEE 802.3af/at PoE PSE

    Air 8KV DCContact 6KV DC

    ESD Protection

    Weight

    0.32Kg

    Dimensions (W x D x H)

    117 x89 x 28 mm (4.6in x3.5in x 1.1in)

    Enclosure

    Plastic 

    Link/ACT

    LED Display

    Power Consumption

    Less than 3Watts 

    FCC Class A, CE Class A

    Regulatory Compliance

    IEC 60068-2-32 (Free fall)
    IEC 60068-2-27 (Shock)
    IEC 60068-2-6 (Vibration)

    Stability Testing

  • PoE

     

     

     

    Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used.

     


    To overcome this distance limit, network installers can simply connect an POE-EX04-30W Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.).
     

     

  • Datasheet

PoE Extender

낂 Inquiry
ꁲ
 
끸
Verification code
Submit