24-Port 2.5GBase-T Web Smart PoE+ Switch with 4 x10G SFP+ Slots

DOWNLOAD

SP7500-24XP4TF-L2

Button

---  24 x 2.5GBASE-T PoE+ ports with 4 x 10G SFP+ Slots
---  2.5GBASE-T supports up to 2.5Gbps connection speeds
---  Compatible with existing Cat5e or better cabling
---  Easy to use web-based management interface
---  Supports up to 32 IPv4/IPv6 static routes
---  Supports LACP, VLAN, and IGMP Snooping
---  IEEE 802.1p QoS with queue scheduling support
---  Per port MAC restriction and dynamic ARP inspection
---  Bandwidth control per port
---  256Gbps switching capacity
---  1U rack mountable (brackets included)


 

 

 

 

Designed for Video Security solution 

  • 24-Port 2.5GBASE-T Web Smart PoE+ Switch with 4 x 10G SFP+ Slots

    Benchu group’s 24-Port 2.5G Web Smart PoE+ Switch with eight 2.5GBASE-T PoE+ ports and four 10G SFP+ slots, model SP7500-24XP4TF-L2, delivers advanced management features with an 256Gbps switching capacity. The SP7500-24XP4TF-L2 is equipped with 2.5GBASE-T PoE+ ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling. This switch provides eight PoE+ connections with a total power budget of 400W, and supplies up to 30W of power per port for devices such as wireless access points, PTZ IP cameras, and VoIP telephony systems. This rack mountable IPv6 ready switch comes with an intuitive web-based interface. Advanced traffic management controls include IP routing, VLAN, QoS, access controls, link aggregation, troubleshooting, and SNMP monitoring, making this a powerful solution for SMB networks.

    Web Smart Management
    Provides an easy to use web-based GUI
    management interface for advanced

    trafficmanagement controls, IP routing,

    VLAN,QoS, access controls, link

    aggregation,troubleshooting, SNMP monitoring, per port MAC restriction, and dynamic ARP inspection.

    2.5GBASE-T Full Power PoE+ Ports
    Equipped with eight 2.5GBASE-T RJ-45
    ports that provide higher gigabit speeds
    capable of up to 2.5Gbps over existing
    Cat5e or better cabling. Supplies up to
    30W of PoE+ power per port with a total
    power budget of 400W.

    10G SFP+ Slots
    Offers two 10G SFP+ slots for high-speed
    network connections providing a costeffective solution in adding 10G link
    capability to an SMB network.

    Troubleshooting
    Traffic statistics and a convenient cable diagnostic test aid in network troubleshooting.

    Hardware Design
    Provides 24 x 2.5GBASE-T PoE+

    ports and 4 x 10G SFP+ slots for

    high-speed network connections,

    and 1U rack mountable.

    Network Management
    A broad range of network configurations
    are supported by: link aggregation,VLAN,

    bandwidth controls, IGMP,loopback detection, port mirroring, QoS,per port MAC restriction, and dynamic ARP inspection.

    Smart Fans
    Smart fans save energy by auto

    -adjusting the fan speed and use

    based on cooling needs.

    IP Routing
    Supports up to 32 IPv4/IPv6

    static routes.

    Full PoE+ Power Budget
    Supplies up to 30 Watts of PoE

    /PoE+ power per port with a

    400W PoE power budget

    2.5GBASE-T Technology
    Connect 2.5GBASE-T supported

    devices at 2.5Gbps for increased throughput over existing Cat5e or better cabling.

    User-friendly Secure Management

    The new release Ultra PoE switch of SP7500-24XP2TF-L2 series, is a L2+ Managed PoE Switch that offers a full suite of L2 features and better PoE functionality and usability. It also supports Power Over Ethernet (PoE), per port 30W. ,Feature-Rich Ethernet Switch for Enterprise-Class The switch delivers advanced functionality in L2+ managed switch including Layer 3 static route, DHCP server, IPv6 support, LLDP, etc. It also has comprehensive security features such as IP source guard and ACL to guard your network from unauthorized access. It helps users to build on the market-leading price/performance with L2+ Managed GbE PoE switch, and provide secure, reliable and ease of use for enterprise/SMB deployments. 

     

    Solution for IPv6 Networking

    With the IPv6/IPv4 dual stack and other management functions with user-friendly interfaces, the SP7500-24XP4TF-L2 are the best choices for IP surveillance, VoIP and wireless service providers to deploy the IPv6 network. More importantly, they help SMBs upgrade their network infrastructures to the IPv6 era without any monetary investment.

     

     

     

    Surge Protection
    This PoE switch is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.

     

     

     

    SP7500-24XP4TF-L2

    24 Ports 10/100/1000/2500Mbps Managed PoE switch with 10G SFP Uplink,6KV surge protection

    Ordering  Information

    Redundant Ring, Fast Recovery for Critical Network Applications

    The SP7500 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 20ms.

  • Hardware Specifications

    Copper Ports

    24x 10/100/1000/2500BASE-T RJ45 Auto-MDI/MDI-X port

    4 x 10GBASE-X SFP+

    SFP/mini-GBIC Slots

    Jumbo Frame

    10K bytes

    24 ports with 802.3af / at PoE injector function with port-1 to port-24

    PoE Injector Port

    Console

    1 x RS232-to-RJ45 serial port (115200, 8, N, 1)

    Switch Architecture

    Store and forward

    Switch Fabric

    256Gbps / non-blocking

    Reset Button

    < 5 sec: System reboot;   > 5 sec: Factory default

    PWR, SYS, LNK/ACT, PoE-in-Use

    LED

    Link Aggregation

    IEEE 802.3ad LACP and static trunk
    Supports 8 groups of 8-port trunk

    Power Requirements

    100~240V AC, 50/60Hz, auto-sensing

    Dimensions (W x D x H)

    440x 290 x 44.5 mm, 1U height (17.32in x 11.42in x 1.75in)

    ESD Protection

    Contact Discharge 6KV DCAir Discharge 8KV DC

    802.1Q tagged-based VLAN 
    Up to 256 VLAN groups, out of 4094 VLAN IDs
    802.1ad Q-in-Q tunneling
    Voice VLAN
    Protocol VLAN
    Private VLAN (Protected port)

    GVRP

    VLAN

    Per port 52V DC, 30 watts (max.)

    PoE Power Output

    Weight

    4.5Kg

    IEEE 802.3x pause frame for full-duplex;Back pressure for half-duplex

    Flow Control

    Address Table

    32K entries 

    96.72Mpps

    Switch Throughput@64Bytes

    TX / RX / both;Many-to-1 monitor

    Port Mirroring

    Layer 2 Functions

    400W

    PoE Power Budget

    PoE Power Supply Type

    End-span

    1/2(+), 3/6(-)

    Power Pin Assignment

    Power over Ethernet

    IEEE 802.3af / 802.3at PoE+ PSE

    PoE Standard

    12.2 megabits

    Shared Data Buffer

    PoE Management

    Open or close port
    Standard POE scheduling management Power and current display
    Automatic restarting function of equipment dead machine Timing reactivation
    Support IP bindings restarting

    STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol

    Spanning Tree Protocol

    IGMP (v2/v3) snooping
    IGMP querier
    Up to 256 multicast groups

    IGMP Snooping

    MLD Snooping

    MLD (v1/v2) snooping, up to 256 multicast groups

    Access Control List

    IPv4/IPv6 IP-based ACL / MAC-based ACL

    Temperature: -40 ~ 75 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

     

    Storage

    Security

    IEEE 802.1X port-based authentication
    Built-in RADIUS client to co-operate with RADIUS server
    RADIUS / TACACS+ user access authentication
    IP-MAC port binding
    MAC filtering
    Static MAC address
    DHCP Snooping and DHCP Option82
    STP BPDU guard, BPDU filtering and BPDU forwarding
    DoS attack prevention
    ARP inspection
    IP source guard


     

    8 mapping ID to 8 level priority queues 
    - Port number 
    - 802.1p priority
    - 802.1Q VLAN tag
    - DSCP field in IP packet
    Traffic classification based, strict priority and WRR

    QoS

    RFC 1213 MIB-II
    RFC 1215 Generic Traps
    RFC 1493 Bridge MIB
    RFC 2674 Bridge MIB Extensions
    RFC 2737 Entity MIB (Version 2)
    RFC 2819 RMON (1, 2, 3, 9)
    RFC 2863 Interface Group MIB
    RFC 3635 Ethernet-like MIB

    SNMP MIBs

    Secure Management Interfaces

    SSH, SSL, SNMP

    Management Functions

    Web browser / Telnet / SNMP v1, v2c, V3
    Firmware upgrade by HTTP / TFTP protocol through Ethernet network
    Remote / Local Syslog
    System log
    LLDP protocol 
    SNTP

    Basic Management Interfaces 

    Standards Compliance 

    IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3ab/z Gigabit SX/LX
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus

    IEEE 802.3bt Power over Ethernet Plus
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    RFC 3810 MLD version 2

    Standards Conformance 

    FCC Part 15 Class A, CE 

    Regulation Compliance 

    Temperature: -20 ~ 55 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

    Operating

    Environment 

  • Benchu group’s 24-Port 2.5G Web Smart PoE+ Switch with eight 2.5GBASE-T PoE+ ports and two 10G SFP+ slots, model SP7500-24XP2TF-L2, delivers advanced management features with an 256Gbps switching capacity. The SP7500-24XP4TF-L2 is equipped with 2.5GBASE-T PoE+ ports that provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling. This switch provides eight PoE+ connections with a total power budget of 400W, and supplies up to 30W of power per port for devices such as wireless access points, PTZ IP cameras, and VoIP telephony systems. This rack mountable IPv6 ready switch comes with an intuitive web-based interface. Advanced traffic management controls include IP routing, VLAN, QoS, access controls, link aggregation, troubleshooting, and SNMP monitoring, making this a powerful solution for SMB networks.

    PC

     

     

     

  • Datasheet

2.5G Smart PoE+ Switch

Inquiry
 
Verification code